|Place of Origin:||China|
|Certification:||ISO9000, CE, CPA,CMC|
|Minimum Order Quantity:||1 Unit|
|Packaging Details:||carton packing 44X33X22cm 1PC/carton|
|Delivery Time:||7-10 working days|
|Flow Velocity Range:||0.01 To 12m/s, Bi-directional||Type:||Handheld|
|Response Time:||0.5s||Power Supply:||AC:85-265V Up To 14 Hours With Fully Charged Internal Batteries|
|Communication:||OCT, RS232 ,Logged Data||Degree Of Protection:||IP68|
IP68 Ultrasonic Flow Meter,
12m/s Ultrasonic Flow Meter,
OCT Ultrasonic Water Meter
Flow Rate Calibration Ultrasonic Flow Measurement TF1100-CH
Transition time ultrasonic flowmeter working method. The battery is rechargeable for 14 hours, and the 4-line backlight display makes the reading more intuitive. The clamp-on ultrasonic sensor (sensor) is installed on the outer surface of the pipeline and is used for non-invasive and non-invasive flow measurement of the liquid and liquefied gas filled in the pipeline. Three pairs of sensors are sufficient to cover the most common pipe diameter ranges. The user can hold and operate the flow meter host by hand. This flexible and easy-to-use flow meter is an ideal tool to support service and maintenance activities. It can also be used to control or even temporarily replace permanently installed instruments.
Flow Rate Calibration Ultrasonic Flow Measurement TF1100-CH Features:
1.14 hours battery (rechargeable), back-lit 4 lines display.
2.Can be used for mobile measurement, flow rate calibration, data comparing, meters running status checking.
4.Data logger function.
5.Wide bi-directional flow range of 0.01 m/s to 12 m/s. Wide liquid temperature range: -35℃~200℃.
Flow Rate Calibration Ultrasonic Flow Measurement Applications:
Chemical industry -chlorine, alcohol, acids, .thermal oils.etc
Water and waste water industry - hot water, cooling water, potable water, sea water etc.)
Refrigeration and air conditioning systems
Metallurgy and mining applications
Food , beverage and pharmaceutical industry
Power supply- nuclear power plants, thermal & hydropower plants), heat energy boiler feed water.etc
Mechanical engineering and plant engineering-pipeline leak detection, inspection, tracking and collection.
● Service and maintenance
● Support of commissioning process and installation
● Replacement of defective devices
● Performance and efficiency measurement
- Evaluation and assessments
- Capacity measurement of pumps
- Monitoring of regulating valves
|Measurement principle||Ultrasonic transit-time difference correlation principle|
|Repeatability||0.2% of reading|
|Accuracy||±1.0% of reading at rates >0.3 m/s);±0.003 m/s of reading at rates<0.3 m/s|
|Flow velocity range||0.01 to 12 m/s, bi-directional|
|Damping of displayed value||0-99s(selectable by user)|
|Liquid Types Supported||both clean and somewhat dirty liquids with turbidity <10000 ppm|
|Power Supply||AC: 85-265V Up to 14 h with fully charged internal batteries|
|Enclosure type||Handheld, Portable|
|Degree of protection||IP65 according to EN60529|
|Housing material||ABS( UL 94HB)|
|Operating temperature||-20℃ to +60℃|
|Display||4 line×16 English letters LCD graphic display, backlit|
|Units||User Configured (English and Metric)|
|Rate||Rate and Velocity Display|
|Degree of protection||IP65 according to EN60529.(IP67 or IP68 Upon request)|
|Pipe diameter range||20-50mm for type S, 40-1000mm for type M, 1000-6000mm for type L|
|Material of transducer||Aluminum for standard temp. sensor, and peek for high temp. sensor|
|Suited Liquid Temperature||Std. Temp.: -35℃~85℃ for short periods up to 120℃|
|High Temp.: -35℃~200℃ for short periods up to 250℃|
|Transducer Size||Type S 48(h)*28(w)*28(d)mm|
|Type M 60(h)*34(w)*33(d)mm|
|Type L 80(h)*40(w)*42(d)mm|
|Cable Length||Std: 5m|
Data sheet download TF1100-CH transit-time handheld ultrasonic flowmet...
Manual Download TF1100-CH transit-time handheld flowmeter Manual.p...
Packing & Delivery
Clamp On Handheld Ultrasonic Flow Meter TF1100-CH for water and chilled water application
Standard meter: 3-7 days
Special meter: pls contact us
Express, by air, by sea can be optional.
Contact Person: Ms. Tracy Xu