|Place of Origin:||China|
|Certification:||ISO9000, CE, CPA,CMC|
|Minimum Order Quantity:||1 Unit|
|Packaging Details:||carton packing 44X33X22cm 1PC/carton|
|Delivery Time:||7-10 working days|
|Measurement Priciple:||Ultrasonic Transit-time Difference Correlation Principle||Accuracy:||Reading+/- 1%|
0.25mm/S Ultrasonic Fluid Flow Meter,
Transit Time Ultrasonic Flow Meter,
0.5s Ultrasonic Flow Meter
Portable Ultrasonic Flow Meter For Petrochemical Industry
Portable Ultrasonic Flow Meter For Petrochemical Industry is very Lightweight and easy to carry, the size of host is 212*100*36mm, The flowmeter can be operated by holding it in your hand while measuring in the field, and the data can be obtained. The sensor is installed outside the tube, no need to shut off or break the tube, it is quick to install and easy to verify and maintain. Three pairs of large, medium and small sensors can almost measure common pipes of different diameters. Because of its small size, convenient portability, quick installation, and high cost performance, it is widely used in mobile measurement, metrology testing, data comparison and other fields.
Portable Ultrasonic Flow Meter For Petrochemical Industry Features:
1.Data logger function.
2.14 hours battery (rechargeable), back-lit 4 lines display.
3.Wide bi-directional flow range of 0.01 m/s to 12 m/s. Wide liquid temperature range: -35℃~200℃.
5.Can be used for mobile measurement, flow rate calibration, data comparing, meters running status checking.
Portable Ultrasonic Flow Meter For Petrochemical Industry Application.
The transit-time series flowmeter is suitable for measuring relatively pure liquid in a closed full tube. It is widely used in the fields of water supply and drainage, air conditioning, heating and ventilation, building energy saving, petrochemical industry, metallurgy, etc. . .
Chemical industry -chlorine, alcohol, acids, .thermal oils.etc
Water and waste water industry - hot water, cooling water, potable water, sea water etc.)
Refrigeration and air conditioning systems
Food , beverage and pharmaceutical industry
Power supply- nuclear power plants, thermal & hydropower plants), heat energy boiler feed water.etc
Metallurgy and mining applications
Mechanical engineering and plant engineering-pipeline leak detection, inspection, tracking and collection.
● Support of commissioning process and installation
● Service and maintenance
● Replacement of defective devices
● Performance and efficiency measurement
- Evaluation and assessments
- Capacity measurement of pumps
- Monitoring of regulating valves
|Measurement principle||Ultrasonic transit-time difference correlation principle|
|Flow velocity range||0.01 to 12 m/s, bi-directional|
|Repeatability||0.2% of reading|
|Accuracy||±1.0% of reading at rates >0.3 m/s);±0.003 m/s of reading at rates<0.3 m/s|
|Damping of displayed value||0-99s(selectable by user)|
|Power Supply||AC: 85-265V Up to 14 h with fully charged internal batteries|
|Liquid Types Supported||both clean and somewhat dirty liquids with turbidity <10000 ppm|
|Enclosure type||Handheld, Portable|
|Degree of protection||IP65 according to EN60529|
|Operating temperature||-20℃ to +60℃|
|Housing material||ABS( UL 94HB)|
|Display||4 line×16 English letters LCD graphic display, backlit|
|Units||User Configured (English and Metric)|
|Rate||Rate and Velocity Display|
|Degree of protection||IP65 according to EN60529.(IP67 or IP68 Upon request)|
|Suited Liquid Temperature||Std. Temp.: -35℃~85℃ for short periods up to 120℃|
|High Temp.: -35℃~200℃ for short periods up to 250℃|
|Pipe diameter range||20-50mm for type S, 40-1000mm for type M, 1000-6000mm for type L|
|Transducer Size||Type S 48(h)*28(w)*28(d)mm|
|Type M 60(h)*34(w)*33(d)mm|
|Type L 80(h)*40(w)*42(d)mm|
|Material of transducer||Aluminum for standard temp. sensor, and peek for high temp. sensor|
|Cable Length||Std: 5m|
Data sheet download TF1100-CH transit-time handheld ultrasonic flowmet...
Manual Download TF1100-CH transit-time handheld flowmeter Manual.p...
Packing & Delivery
Clamp On Handheld Ultrasonic Flow Meter TF1100-CH for water and chilled water application
Standard meter: 3-7 days
Special meter: pls contact us
Express, by air, by sea can be optional.
Contact Person: Ms. Tracy Xu