Lanry Instruments (Shanghai) Co., Ltd.
Specialize In Ultrasonic Flowmeter More Than 20 Years!
|Place of Origin:||China|
|Certification:||ISO9000, CE, CPA,CMC|
|Minimum Order Quantity:||1PC|
|Packaging Details:||carton packing 44X33X22cm 1PC/carton|
|Delivery Time:||7-10 working days|
|Measure Principle:||Transit-time Difference||Veolicty Range:||0.01 To 12m/s|
|Accuracy:||Reading+/- 1%||Pipe Size:||DN20-6000|
|Transducer:||Clamp-on; Non-invasive||Output:||Datalogger/4-20mA /OCT /RS485/RS232/GPRS|
portable ultrasonic water flow meter,
portable ultrasonic liquid flow meter
The clamp-on ultrasonic transducers (sensors) are mounted on the external surface of the pipe for non-invasive and non-intrusive flow measurement of liquid and liquefied gasses in fully filled pipe. Three pairs of transducers are sufficient to cover the most common pipe diameter ranges. In addition, its optional thermal energy measurement capability makes it possible to carry out a complete analysis of thermal energy usage in any facility.
This flexible and easy to use flow meter is the ideal tool for the support of service and maintenance activities. It can also be used for the control or even for the temporary replacement of permanently installed meters.
1.50-hour battery (rechargeable), back-lit 4 lines display all integrated into a rugged, watertight enclosure.
2. Data logger function.
3. The heat measurement function by configuring with paired temperature sensors.
4. Non-invasive transducers.
5. Wide bi-directional flow range of 0.01 m/s to 12 m/s. Wide liquid temperature range: -35℃~200℃.
6. Works reliably in both clean and somewhat dirty liquids with turbidity<10000ppm.
7. Lightweight and easily transportable in box.
● Service and maintenance
● Replacement of defective devices
● Support of commissioning process and installation
● Performance and efficiency measurement
- Evaluation and assessments
- Capacity measurement of pumps
- Monitoring of regulating valves
● Energy efficiency audits
Water and waste water industry - hot water, cooling water, potable water, sea water etc.)
Chemical industry -chlorine, alcohol, acids, .thermal oils.etc
Refrigeration and air conditioning systems
Food , beverage and pharmaceutical industry
Power supply- nuclear power plants, thermal & hydropower plants), heat energy boiler feed water.etc
Metallurgy and mining applications
Mechanical engineering and plant engineering-pipeline leak detection, inspection, tracking and collection.
|Measurement principle||Ultrasonic transit-time difference correlation principle|
|Flow velocity range||0.01 to 12 m/s, bi-directional|
|Repeatability||0.2% of reading|
|Accuracy||±1.0% of reading at rates >0.3 m/s);±0.003 m/s of reading at rates<0.3 m/s|
|Damping of displayed value||0-99s(selectable by user)|
|Liquid Types Supported||both clean and somewhat dirty liquids with turbidity <10000 ppm|
|Power Supply||AC: 85-265V Up to 50 h with fully charged internal batteries|
|Degree of protection||IP65|
|Operating temperature||-20℃ to +60℃|
|Housing material||ABS( UL 94HB)|
|Display||4 line×16 English letters LCD graphic display, backlit|
|Units||User Configured (English and Metric)|
|Rate||Rate and Velocity Display|
|Totalized||gallons, ft³, barrels, lbs, liters, m³,kg|
|Thermal energy||unit GJ,KWh can be optional|
|Communication||4~20mA,OCT, Relay, RS232, RS485 (Modbus),Logged data|
|Security||Keypad lockout, system lockout|
|Degree of protection||IP65 according to EN60529.(IP67 or IP68 Upon request)|
|Suited Liquid Temperature||Std. Temp.: -35℃~85℃ for short periods up to 120℃|
|High Temp.: -35℃~200℃ for short periods up to 250℃|
|Pipe diameter range||20-50mm for type S, 40-1000mm for type M, 1000-6000mm for type L|
|Transducer Size||Type S 48(h)*28(w)*28(d)mm|
|Type M 60(h)*34(w)*32(d)mm|
|Type L 80(h)*40(w)*42(d)mm|
|Material of transducer||Aluminum for standard temp. sensor,and peek for high temp. sensor|
|Temperature Sensor||Pt1000, 0 to 200℃, Clamp-on and Insertion type Accuracy: ±0.1%|
Contact Person: Lanry